Cross-Plate Anchor for 20″ (508 mm) Hole used with 1″ (25.4 mm) Diameter Rod.
The Chance Cross-Plate anchor is made for installation in holes drilled by power diggers or dug with backhoe. . Because the size of the hole does not affect holding capacity, the hole can be dug by the same auger that is used to dig the pole holes ontransmission projects. Cross-Plate anchors are installed in a diagonal bored hole which is undercut so the anchor is at right angles to the guy. A rod trench is either cut with a trenching tool or drilled with a small power auger. Both anchor and rod trenchshould be refilled and tamped.
Cross-plate anchors are designed to be installed against side of hole. Rod trench is required to align rod with guy load.
Painted with black paint
Nut retainer on bottom of anchor holds nut in place during installation
1st alternate image: Bottom view of Anchor with Anchor Rod installed. Anchor Rod not included with Anchor
2nd alternate image: Top view of Anchor with Anchor Rod installed. Anchor Rod not included with Anchor
Product Details
General
Application Earth Tension Anchoring
Coating Black Paint
Type Earth Tension Anchors
UPC 096359066514
Dimensions
Anchor Hole Size 20 in
Area 250 in²
Dimensions 17.000 in x 17.000 in x 3.000 in
Height 3.000 in
Length 17.000 in
Rod Diameter – Order Separately 1.000 in
Weight 15.680 lb
Width 17.000 in
Logistics
Pallet Quantity 56
Standard Package 4
Reviews
There are no reviews yet.