Anchor, Lead/Adapter, SS5, 10/12 X 3.5ft Tripleye

Square Shaft (SS 5) Lead Section, 3′ 6″ (1067 mm) long with 10″ (254 mm) -12″ (304 mm) Helices with Guy Adapter Tripleye in separate box.
Square Shaft anchors are used in areas where weak soil conditions exist and/or higher holding capacities are required. Extension shafts are added to allow the Lead Section to be installed to the proper depth. The Chance Square Shaft “SS” Anchor Lead Sections are available in various helical plate combinations and square shaft sizes. The Square Shaft screw anchor system consists of three galvanized components: Lead Section, Extension Shaft (sold separately), and the Guy Adapter.

Square Shaft Lead Sections are assembled to Square Shaft Extension with through bolt.
The helical shaped plates do not auger into the soil but rather screw into it with minimal soil disturbance
Hot dipped galvanized per ASTM A153
Capacity of anchor can be determined by measuring installation torque

Add to wishlist
Category:

Description

Product Details
General
Application Helical Anchoring
Coating Galvanized, ASTM A-153
EU RoHS Indicator No
Eyenut Style Tripleye
Number of Helices 2
Strength Note Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength. Note: Pulling Eye Rated: 12,000 lbs. Guy wire should not be attached to pulling eye.
Tensile Strength 70000 lb.
Torque Rating 5500 ft-lbs
Type Lead Sections
UPC 096359068556
Dimensions
Anchor Helix Diameter(s) 10 in – 12 in
Dimensions 42.000 in x 12.000 in x 12.000 in
Height 12.000 in
Length 42.000 in
Weight 70.600 lb
Width 12.000 in
Logistics
Standard Package 1

Reviews

There are no reviews yet.

Be the first to review “Anchor, Lead/Adapter, SS5, 10/12 X 3.5ft Tripleye”

Your email address will not be published. Required fields are marked *

Related products