Cross-Plate Anchor for 16″ (406 mm) Hole used with 0.625″ (15.9 mm) or 0.75″ (19.1 mm) Diameter Rod.
The Chance Cross-Plate anchor is made for installation in holes drilled by power diggers or dug with backhoe. . Because the size of the hole does not affect holding capacity, the hole can be dug by the same auger that is used to dig the pole holes ontransmission projects. Cross-Plate anchors are installed in a diagonal bored hole which is undercut so the anchor is at right angles to the guy. A rod trench is either cut with a trenching tool or drilled with a small power auger. Both anchor and rod trenchshould be refilled and tamped.

Cross-plate anchors are designed to be installed against side of hole. Rod trench is required to align rod with guy load.
Painted with black paint
Nut retainer on bottom of anchor holds nut in place during installation
1st alternate image: Bottom view of Anchor with Anchor Rod installed. Anchor Rod not included with Anchor
2nd alternate image: Top view of Anchor with Anchor Rod installed. Anchor Rod not included with Ancho

Category:

Description

Product Details
General
Application Earth Tension Anchoring
Coating Black Paint
Type Earth Tension Anchors
UPC 096359066477
Dimensions
Anchor Hole Size 16 in
Area 150 in²
Dimensions 13.500 in x 13.500 in x 3.000 in
Height 3.000 in
Length 13.500 in
Rod Diameter – Order Separately
0.625 in
0.750 in
Weight 10.192 lb
Width 13.500 in
Logistics
Pallet Quantity 162
Standard Package 6

Reviews

There are no reviews yet.

Be the first to review “Anchor, Cross-Plate, 16in painted fits 5/8,3/4in rod”

Your email address will not be published. Required fields are marked *