Cross-Plate Anchor Galvanized for 20″ (508 mm) Hole used with 1″ (25.4 mm) Diameter Rod.
The Chance Cross-Plate anchor is made for installation in holes drilled by power diggers or dug with backhoe. . Because the size of the hole does not affect holding capacity, the hole can be dug by the same auger that is used to dig the pole holes ontransmission projects. Cross-Plate anchors are installed in a diagonal bored hole which is undercut so the anchor is at right angles to the guy. A rod trench is either cut with a trenching tool or drilled with a small power auger. Both anchor and rod trenchshould be refilled and tamped.

Cross-plate anchors are designed to be installed against side of hole. Rod trench is required to align rod with guy load.
Hot dipped galvanized per ASTM A153
Nut retainer on bottom of anchor holds nut in place during installation

Category:

Description

Product Details
General
Application Earth Tension Anchoring
Coating Galvanized, ASTM A-153
Type Earth Tension Anchors
UPC 096359066521
Dimensions
Anchor Hole Size 20 in
Area 250 in²
Rod Diameter – Order Separately 1.000 in
Weight 17.150 lb
Logistics
Pallet Quantity 50
Standard Package 1