Cross-Plate Anchor Galvanized for 24″ (610 mm) Hole used with 1″ (25.4 mm) Diameter Rod.
The Chance Cross-Plate anchor is made for installation in holes drilled by power diggers or dug with backhoe. . Because the size of the hole does not affect holding capacity, the hole can be dug by the same auger that is used to dig the pole holes ontransmission projects. Cross-Plate anchors are installed in a diagonal bored hole which is undercut so the anchor is at right angles to the guy. A rod trench is either cut with a trenching tool or drilled with a small power auger. Both anchor and rod trenchshould be refilled and tamped.

Cross-plate anchors are designed to be installed against side of hole. Rod trench is required to align rod with guy load.
Hot dipped galvanized per ASTM A153
Nut retainer on bottom of anchor holds nut in place during installation

Category:

Description

Product Details
General
Application Earth Tension Anchoring
Coating Galvanized, ASTM A-153
EU RoHS Indicator No
Type Earth Tension Anchors
UPC 096359066613
Dimensions
Anchor Hole Size 24 in
Area 400 in²
Dimensions 24.000 in x 24.000 in x 4.000 in
Height 4.000 in
Length 24.000 in
Rod Diameter – Order Separately 1.000 in
Weight 34.114 lb
Width 24.000 in
Logistics
Pallet Quantity 24
Standard Package 1

Reviews

There are no reviews yet.

Be the first to review “Anchor, Cross-Plate, 24in galvanized fits 1in rod”

Your email address will not be published. Required fields are marked *